A steel frame kit home suits Western Australian sites from Perth’s sandy coastal plain to the cyclonic Pilbara because the frame is engineered for the exact wind region, soil and bushfire attack level (BAL) of your block, can’t be eaten by termites, and won’t burn. Our kits are the structure only (TRUECORE steel wall frames, roof trusses, a steel subfloor where the design uses one, and site-specific engineering), from $35,000 + GST. Roofing, cladding, windows, doors, insulation and fit-out are supplied by your trades, and delivery to your WA address is quoted. This page explains how a steel frame is engineered for WA conditions, how approval works, and what to check before you order.
What a Steel Frame Kit Includes
| In the kit | Not in the kit (your trades) |
|---|---|
| TRUECORE steel wall frames, made to your floor plan | Slab or footings and site works |
| Steel roof trusses | Roofing, cladding, windows and doors |
| Steel subfloor where the design uses one | Insulation, linings and flooring |
| Structural engineering for your wind region, soil and BAL | Plumbing, electrical, fit-out and the energy rating |
See the full list on our kit inclusions page.
Wind Regions in WA: Cyclonic North, Non-Cyclonic South
Western Australia has the widest spread of wind conditions of any state, and the wind region is the single biggest engineering input for a kit home here. Wind regions come from AS/NZS 1170.2, and houses are classified for their site under AS 4055.
| Area | Wind region | What it means for the frame |
|---|---|---|
| Perth, Mandurah, the South West, Great Southern and Wheatbelt | Non-cyclonic (Region A) | Bracing and tie-downs are designed for the site’s N wind class, set by terrain, shielding and topography. |
| Pilbara coast (for example Port Hedland, Karratha, Onslow, Exmouth) | Cyclonic Region D | The highest design wind speeds in Australia. The frame, tie-downs, connections and every external element must be engineered for cyclonic loads. |
| Kimberley coast and Gascoyne coast (for example Broome, Carnarvon) | Cyclonic Region C | Cyclonic engineering for the frame and the building envelope, including windows, doors and roof fixings supplied by your trades. |
| Inland north | Region B or A, depending on distance from the coast | Your certifier confirms the region for the exact address. |
Give us the street address or lot number when you ask for a price, so the engineering is done for the right wind region and class from the start.
Other WA Conditions the Engineering Covers
| Condition | Standard that applies | How the steel frame deals with it |
|---|---|---|
| Bushfire-prone areas (Perth Hills, South West, Great Southern and many rural fringes) | AS 3959, and the WA Map of Bush Fire Prone Areas | Steel is non-combustible. Kits can be engineered up to BAL-FZ, but roofing, cladding, windows, doors and gaps must also be built to the BAL. |
| Soils: sand on the Swan Coastal Plain, reactive clay inland and in parts of the metro area | AS 2870 site classification | The soil test sets the slab or footings. A raised steel subfloor on piers is an option on sloping or difficult sites. |
| Termites (statewide) | NCC termite provisions | Steel frames and trusses can’t be eaten by termites. Other parts of the building may still need termite management. |
| Heat in the north and inland, cooler winters in the South West | NCC energy provisions (in WA, the NCC 2022 energy efficiency provisions apply from 1 May 2025) | Steel conducts heat, so walls and roofs need the thermal breaks and insulation the energy assessment specifies. |
| Coastal salt air | Durability of steel, coatings and fixings | Sites close to the sea need coatings, fixings and connectors rated for the exposure. |
The frames are designed to the cold-formed steel structures standard (AS/NZS 4600). For a comparison of frame materials, read steel frame vs timber homes.
Approvals and Owner Building in WA
In WA your local government issues the building permit, and a registered building surveyor checks the design for compliance. Planning approval from the local government is needed as well where the zoning, R-Codes or a bushfire, heritage or rural policy requires it. The engineering that comes with the kit forms part of the building permit documents, together with the site plan, the soil report, the BAL assessment where the site is bushfire-prone, and the energy rating. WA did not adopt the NCC 2022 livable housing provisions (ABCB adoption dates). We assist you with drafting, council planning and DA, and building permits.
Owner builders: if the estimated value of the building work exceeds $20,000, you need owner-builder approval from the state (or a registered builder). After a permit is granted you must generally wait six years before applying again, and selling an owner-built home within seven years of the permit is an offence unless you hold home indemnity insurance covering the buyer for the rest of that period (WA Government: owner-builder approval).
Picking a Design for WA
The same steel frame system is used across 1-bedroom cabins, granny flats, farmhouses, barn homes and 4-bedroom family homes. Kit Home Floor Plans lists designs for Western Australian blocks, from Perth lots to acreage in the South West.
Building in the metro area? See kit homes Perth.
Delivery to WA
Perth is one of our seven network locations (Melbourne, Sydney, Adelaide, Gold Coast, Brisbane, Bundaberg and Perth). Delivery is quoted for your address, whether that is a Perth suburb, the South West or a regional town in the Pilbara or Kimberley. For remote sites, tell us about access for a truck and where the kit can be unloaded.
Questions to Ask Before You Order a Steel Frame Kit
- Is the engineering specific to my address (wind region and class, soil class, BAL), and is it signed by an engineer?
- For a cyclonic site: are the tie-downs, connections and fixings in the kit rated for Region C or D, and what must my trades supply to the same rating?
- What exactly is in the kit (frames, trusses, subfloor, bracing, connectors, screws), and what isn’t?
- Which steel and coating is used, and is it suitable for my distance from the coast?
- How are thermal breaks handled for the energy rating?
- How is delivery priced to my site, and can a truck get onto the block?
Frequently Asked Questions
Can a steel frame kit home be built in a cyclonic area of WA?
Yes. Each kit is engineered for the site’s wind region and class, including cyclonic Regions C and D in the north. The roofing, windows, doors and their fixings, supplied by your trades, must also be rated for the same cyclonic loads.
How much does a steel frame kit home cost in WA?
Our steel frame kits start from $35,000 + GST for the structure only. The price of a particular design depends on its size and on your site’s wind, soil and BAL engineering, which matters most on cyclonic sites. Roofing, cladding, windows, fit-out, footings and delivery are priced separately.
Do I need owner-builder approval in WA?
Yes, if the estimated value of the building work exceeds $20,000 and you are not using a registered builder. The state issues owner-builder approval and your local government issues the building permit.
Do steel frames suit Perth’s sandy soils?
Yes. The frame sits on whatever footing the soil test calls for. Sand on the coastal plain is usually a stable site class, while reactive clay inland needs footings designed to AS 2870.
Do you deliver steel frame kits to regional WA?
Yes. Perth is one of our seven network locations, and delivery is quoted for your address anywhere in Western Australia.
Get WA-Specific Pricing
Send through your block details. Include the street address or lot number so we can price the engineering for your wind region, soil and BAL. Call 1300 866 131 or use the form below.